| |
| Here’s where you’ll find the latest in leading-edge solutions from UTS. Enjoy your visit! |
| |
 |
 |
| |
| | TK Solver 5.0 Update: Release 5.0.139 |
| | |
| |  | Applies to TK Solver 5.0 Regular and Premium Editions. |
This update includes a significant upgrade to the NIST fluid property functions in TK, as well as the REFPROP utility in the Wizards menu. A complete summary of the new features is included in the on-line TK documentation. Here are a couple highlights. Water vapor and hydrogen can now be included in fluid mixtures. The maximum number of mixture components has increased to 15.
This update will overwrite the files your existing FLUIDS and MIXTURES folders in the TKExtLib folder of your TK Solver installation. If you would like to retain the old files for any reason, rename them prior to installing the update. |
| | |
|
| |
| | Virtually Perfected |
| | |
| | Release Date: 16 Aug 2007
UTS weighs in on a discussion of simulating moving designs.
Source: Motion System Design. |
| | |
|
| |
| | Advanced Spring Design 6.0.11 Update |
| | |
| |
 | New in ASD 6.0.11: | ASD 6.0.11 allows for input of arms angle in the power user forms of the torsion spring programs. We do not encourage you to use arms angle as an input however as it provides ambiguous information and the solution will not be unique. For example, if the arms angle in the free position is 225 degrees and is 60 degrees with a load applied, what was the deflection? Was it 195 degrees? 455 degrees? Clearly, more information is required. We suggest that you use coils and deflections instead of arms angles, as that provides unambiguous information to the program and the solution will be unique.
 Life estimates have been added for all compression, extension, and torsion spring programs.
Power springs now include an option to use 50% of the available space. This adds one additional constraint when this option is activated.
A keystone factor option is included for rectangular wire torsion springs. When this is used, the body length increases slightly.
The Torsion Springs models have been overhauled in several key areas. New variables were added for contact forces on each moment arm at each load condition. Individual moment arm lengths are now specified in the geometry section of the power user form. Estimated cycle life is now reported (except for double torsion springs; we are looking into adding that in the next update). The default text height in the DXF image is better calibrated.
Estimated cycle life has been added to compression springs. We expect to have this added to the extension spring models in the next update.
The check for updates via the Help Menu is now working again. We recently moved the update location, breaking the link to the older Help menus.
Bug Fixes in ASD 6.0.11:
If there were more than two caution messages, only the first two were displayed in the report.
DXF text in metric images was too small.
Outstanding Issues for Future Updates
Increase the number of decimal places in several of the fields.
Change the metric spring rate to N/mm instead of N/m. |
| | |
|
| |
| | TK Model Share! |
| | |
| | If you created some TK functions or entire models that you would like to share with others in the TK user community, email them to us, along with brief descriptions, and we will verify that they work as described and then post them in the TK Model Share section of our site. 
If you would like other TK users to be able to contact you about your model, include your email address in a comment within the TK file. Otherwise, we will assume you would like to remain anonymous. |
| | |
|
| |
| | Interactive Roark's Formulas 7.0.4 |
| | |
| |
 | New in IRF update 7.0.4 |
Additional text was added to the menu descriptions, particularly in areas where cases can be merged.
Plot labels were improved throughout.
Redundant equations were added to some cases involving hyperbolic functions to avoid extreme values. For example, if A = sinh(350), B = sinh(400), and C = cosh(400), then A*B/C causes an exponent overflow error because A*B is too large. However, since B/C = tanh(400) = 1, A*B/C = sinh(350) which can be computed.
Plates -- Large Deflections: Instead of lumping all the cases into a single model, individual models are now presented and they are more flexible (backsolvable)
Some of the cross section properties (distances from the neutral axis) for unequal leg angles were calculated incorrectly in 7.0.2 and have been corrected in 7.0.4. |
| | |
|
| |
| | Roark's Formulas for Excel: December 2005 |
| | |
| | UTS have released an Excel based version of “Roark’s Formulas for Stress and Strain – 7th Edition”. Key features include:
All tables and cases made available for solving in Excel. Simply select the case(s) and then load in Excel.
Ability to load models in a “Power” or “Standard” user mode. The Power user is able to work with variables that they are familiar with and undertake what if calculations and back-solve solutions. Standard user mode loads a model in a pre-selected format. You choose!
Once available in Excel, enter input data and output variables will be immediately solved. Interactive plots where loaded will update automatically.
Create a report on your calculations and distribute in PDF format.
Also included is a Superposition wizard assisting with multiple load calculations on beams and plates.
UTS are the only company in the world to make this version of this invaluable handbook available in Excel. |
| | |
|
| |
